1. Driving

Before driving, the brake and pump station should be checked to ensure that the battery is fully charged. Hold the control handle with both hands and force the vehicle to move slowly towards the working goods. If you want to stop, you can use hand brake or foot brake to stop the vehicle.

2. Unloading

(1) Keep vertical and close to the shelf carefully when the fork is low and insert it into the bottom of the shelf.

(2) Return the palletizer and move the fork out of the pallet

(3) Handle foldable platform truck lifts the fork to the required height and slowly moves to the unloading pallet, while ensuring that the fork is easy to enter the pallet and that the goods are in the safe position of the fork.

(4) Lift the fork until the pallet is lifted from the shelf.

(5) Hydraulic platform vehicle slowly recedes in the passage

(6) Slowly lowering the cargo while ensuring that the fork does not come into contact with obstacles in the process of lowering the cargo.

Note: During cargo lifting, steering and braking operations must be slow and careful.

3. Stacking

(1) Keep the goods low and approach the shelves carefully.

(2) Upgrading the goods above the shelf level

(3) Slowly move forward and stop when the goods are above the shelf. Put down the pallet at this point and pay attention to the fork not exerting force on the shelf under the goods to ensure that the goods are in a safe position.

(4) Slowly return and ensure the safe and firm position of the pallet

(5) Lower the fork to the position where the stacker can run.

4. Safety facilities

(1) Main switch: main switch of power supply

(2) Foot brake: reliable parking brake

(3) Current Limiting Valve: Controlling Decline Speed

(4) Pressure Limiting Valve: Control Load

(5) Protection nets: protecting drivers

5. Prohibitions

(1) Prohibiting the operation of semi-electric stacking trucks after drinking

(2) No overloading, uneven and flat stacking of goods

(3) No straddling

(4) No parking on ramps or steps