First, the monthly maintenance of lifting platform vehicles

In the monthly maintenance of the pneumatic-hydraulic dual-function platform, it is necessary to carefully check the wear of the rollers, intermediate shafts and bearings of the hydraulic elevator, the pin shafts and bearings of the cylinder, the hinge shafts of the boom and bearings, etc.

1. Check the oil quality and oil level of hydraulic oil. When the platform is lifted all the way, if foreign bodies such as darkening, sticking or gravel are found, it should be replaced in time (32 # hydraulic oil).

2. Adding some lubricating oil to all bearing parts of the machine to prolong the service life of the elevator bearing.

Second, year-end maintenance of fixed lifting platform

1. Hydraulic stacker truck releases the hydraulic oil of the elevator, tightens the joint to take out the oil filter, cleans it up with compressed air, then puts it back into the tank, replaces the new oil, and connects the pipeline.

2. Check all hydraulic pipes and joints of lifting platform. Pipeline should not be damaged, joint should not be loosened, all joints must be tightened.

3. Remove and disassemble the descending valve under the high lift truck. Blow the plunger clean with compressed air, then load it in and reset it. Van.

Fork platform duplex stacker truck belongs to Scissor-fork structure. Its lifting height is low. Generally, single scissor fork has no guide rail pillar, which is used to adjust the height of the truck. Commonly used in this equipment are stage lifting, stage lifting, as well as automatic lifting of production line.

Fixed lifting platform can customize different workbenches according to different working forms, such as round stage, long stage and heterosexual stage. Lifting platform manufacturers can also configure different power forms and control modes according to the site conditions. It can also be equipped with different functions according to the requirements of the customer's own working environment.