There is no specific acceptance standard for hydraulic platform trucks or fixed elevators. The definition of this is very vague, which also causes many unqualified products to enter the market and causes great losses to customers. Today, Xiaobian tells you about the acceptance standard of hydraulic lifting platform. Guideway elevator

The load-bearing test is a very important standard. You can carry out continuous 30 times under the maximum load-bearing tonnage to see if there is any abnormal condition of the equipment. If the lifting height can not reach or can not rise, then the load-bearing of the lifting platform can not reach the standard. In addition, during the operation of the hydraulic lifting platform, listen to the size of the noise, usually the motor rotation will produce some noise, if not more than 80 decibels, are within the normal range. There is also one of the most important tilt tests, there will be some tilt in the rising state, what is the normal tilt range? The state stipulates that if the inclination of aerial working equipment is less than 5% - 8%, it is normal. Fixed Hydraulic Lift Platform

Through the above tests, we can see whether the hydraulic lifting platform meets the industry standards. In addition, choose the lifting platform as far as possible to choose the stronger enterprises, do not covet cheap because of price reasons, ignore the quality of the service and the machine itself.

In storage, handling and stacking equipment, in addition to the carrier is widely used in handling equipment, there is also a high market demand equipment in stacking, that is manual stacking truck.

Manual stacking truck is a widely used equipment in stacking. It is a non-power, non-polluting manual hydraulic stacking equipment. Commonly used places are factories, workshops, wharfs, stations, warehouses and so on.

Such widespread use has also brought some troubles to many customers. Once problems arise in the stacking truck, do you think it is difficult to maintain the knob unloading structure platform truck? It is not very difficult. It is simple in structure and is not complicated. However, there are still many customers who can not solve the problem by themselves.

So what are the difficulties in the maintenance of manual stacker truck?

In fact, the difficulty of maintenance for professional maintenance personnel, it is not difficult, the key is if the steps to operate, such as manual heap truck oil leakage, if the seal ring aging or damage, need to be replaced, buy on the market, in the installation process, if there is no experience, the installation method is inappropriate, It may also cause damage to new seals. If the lifting can not reach the original height, and the customers themselves do not know why, this is a very troublesome thing. So how to solve these problems?

First, if you do not know how to install and replace the sealing ring, you should contact the relevant personnel of the manufacturer by telephone, let them telephone guidance, or find professional personnel to repair and replace.

Second, if you don't know what causes the stack truck to fail to rise or fall slowly, and can't reach the original increase, and without affecting work efficiency, find merchants to repair it. It's the quality problem that you choose to return the goods, or you don't cooperate with this company next time. If it affects production, find someone to repair it as soon as possible to lighten your eyebrows. Urgent.

In fact, manual stacker maintenance is not difficult, but many customers did not seriously ponder and study the equipment, know more, experience, there are natural ways to solve, but most of the customer friends do not have time to pay attention to these.